'03 Durango Speakers Mountings

Home / the12volt's Install Bay / Car Audio / '03 Durango Speakers Mountings (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

straightener

Member - Posts: 1

Joined: December 30, 2003

Location: United States

Posted: December 30, 2003 at 7:34 AM / IP Logged

Searched around here and didn't find the answer, which means I probably missed it somewhere...

Anyway, recently purchased and '03 Durango and am in the process of upgrading the stereo/ speakers. I have JL Audio 6" speakers for all four doors. When I took my driver door apart, the factory speaker was housed in a plastic mount which I unscrewed from the door. There is no room to mount my new speaker directly into the door without this mounting. I removed the factory speaker from the plastic mounting, and am trying to figure out a way to secure my new speaker in this thing. The mounting was designed to fit the factory speaker so although my new speaker fits into it, I can't screw it in or anything. Any ideas on how to secure my new speaker to this mounting? Does an aftermarket mounting adapter exist? I believe the '03 Durango will have the same interior as the '01 and '02. Thanks for any help/ advice in advance!

Sweekster

Silver - Posts: 481

Joined: May 13, 2003

Location: United States

Posted: December 30, 2003 at 11:54 AM / IP Logged

You might need to make an adapter plate and attach the plate to mount and then attach the JL to the adapter. According to crutchfield, you can fit 6 3/4 speakers in the doors. How does the factory speaker attach to this mount?

Duane...

If you think you're confused, imagine how you feel. '03 Durango Speakers Mountings -- posted image.

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: December 30, 2003 at 3:21 PM / IP Logged

if it is your own vehicla i would just drill and screw new holes into the plastic ring to fit the jl's onto them

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

mobile E

Copper - Posts: 217

Joined: August 31, 2003

Location: United States

Posted: December 30, 2003 at 4:00 PM / IP Logged

ya, i would just drill holes for the jl's right into the old bastket.. i had to do that for my jl's

everything stolen :(

Workin on a new system :)

Peace in the middle east

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'03 Durango Speakers Mountings

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.