Speaker Terminal Cups

Home / the12volt's Install Bay / Car Audio / Speaker Terminal Cups (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ravenndude

Silver - Posts: 250

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 07, 2004

Location: United States

Posted: May 25, 2004 at 2:00 PM / IP Logged

I already put this in the fiberglass section ... but i think i'll get a faster responce here...

I'm trying to run an 8 gauge wire from the inside of my box to the outside. But i can't fine any Speaker Terminal Cups that will do anything larger then 12ga.

Would it be ok for my to drill a whole in the wooden part of the enclosure (the enclosure is made of wood and fiberglass) that is just big enough for the pos and neg wires to run through and then fill in the extra space with some kind of glue or caulking?

IDK if you need to know this but its an Alpine Type-R SWR-1221 wired at 4ohms - powered by a RF 360.2

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: May 25, 2004 at 2:15 PM / IP Logged

there is no reason to use the 8ga wire but if you want to you can usually get terminal cups that will work for that. i know i had a pair of cups on a box of mine that fit 6ga wire. ill try searching for a pair for you when i get out of this damn place called school.

Quad L Handyman services

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Speaker Terminal Cups

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.