Jensen CH4001 CD/receiver

Home / the12volt's Install Bay / Car Audio / Jensen CH4001 CD/receiver (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

fmpaul

Member - Posts: 2

Joined: August 21, 2002

Location: United States

Posted: September 10, 2002 at 11:10 AM / IP Logged

Jensen CH4001 CD/receiver -- posted image.

Hi folks: Can anybody tell me what the identity of the 4 RCA outputs are on this unit? I just purchased a new one for my stepdaughter's F150 from FRY's, in the sealed box...and...guess what? Neother the Install Manual, nor the Operation Manual, make any mention of RCA outputs whatsoever Jensen CH4001 CD/receiver -- posted image.

And, to add insult to injury, the web site they show on the front of both manuals, www.jensenaudio.com, takes you to a redirect site that has no connection to Jensen that I can find. I am replacing a JVC KD GT5 tuner/CD changer that has only RCA outs. I need to know what are front and what are rear. The harness that comes with it is not marked either. Some customer support. Jensen CH4001 CD/receiver -- posted image.

Your help is much appreciated. Thank you.

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: September 10, 2002 at 11:07 PM / IP Logged

I don't know much about Jensens, but I recall Sony used to use RCA inputs for their changers. If they're not marked as outputs that may be the case. If they are outputs, you can check which one is F and R by hooking one pair up(assuming the deck and amps turn on), fading it all the way forward or backward, and seeing which way maintains the sound.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Search for other posts by chriswallace187

fmpaul

Member - Posts: 2

Joined: August 21, 2002

Location: United States

Posted: September 23, 2002 at 2:46 PM / IP Logged

Thanks Chris.

It has a black pair and a gray pair. Black is front/gray rear. The one hitch was the Jensen has no remote amp +12 volt wire. Luckily, the power antenna wire stays hot all the time the HU is on and worked out just fine as a remote amp wire. Aside from the pain in the a** the outboard converter box is, it worked out pretty well. Took me about 30 minutes to do the swap.

Thanks again to all.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Jensen CH4001 CD/receiver

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.