PPI amp ?

Home / the12volt's Install Bay / Car Audio / PPI amp ? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

fugit

Copper - Posts: 169

Joined: May 19, 2004

Location: United States

Posted: July 09, 2004 at 8:21 AM / IP Logged

Does anyone know if a PPI PCX-440 is capable of 2 ohm mono? I know you can bridge the 4 channels to 2 @ 4ohms but I don't know if it could handle 2. I know the older ones were 1 ohm stable, but the I don't know about the pcx, or dcx line.

"I'm Rick James bi***, enjoy yo' self Ah Ah Ah"

Dave Chappelle as Rick James

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: July 09, 2004 at 2:40 PM / IP Logged

The PCX multi-channel line is rated into 4-ohms with two channels bridged and no lower. I have never tested them to see if they are stable at lower loads.

Support the12volt.com

fugit

Copper - Posts: 169

Joined: May 19, 2004

Location: United States

Posted: July 09, 2004 at 9:21 PM / IP Logged

Thanks, you don't know how to make a 2ohm dvc into a 4ohm dvc without buying a new one do you? PPI amp ? -- posted image.

"I'm Rick James bi***, enjoy yo' self Ah Ah Ah"

Dave Chappelle as Rick James

DYohn

Moderator - Posts: 10,741

Joined: April 22, 2003

Location: Arizona, United States

Posted: July 09, 2004 at 10:31 PM / IP Logged

Yes, it's called re-coning. But why since a 2-ohm DVC wired in series is 4-ohms...

Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

PPI amp ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.