amp help

Home / the12volt's Install Bay / Car Audio / amp help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

autobots

Member - Posts: 1

Joined: September 23, 2004

Location: United States

Posted: October 19, 2004 at 3:02 PM / IP Logged

im installing a amp and subs in my friends 01 eclipse and shes using the factory deck so she got the loc for the rca cables my question is what wire do i splice the remote wire into. where to run the amp turnon wire to. do i run it to the deck power or what first time ever hooking up on a factory deck and help would be great

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: October 19, 2004 at 4:32 PM / IP Logged

Just tap into the ignition wire at the deck. That will do fine for your remote line

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Asmodeus

Silver - Posts: 393

Joined: September 02, 2004

Location: United States

Posted: October 19, 2004 at 4:35 PM / IP Logged

What you need is Accesory power (Key-On Key-Off) So to do this get a test light or a Digital Multi Meter...Unplug the factory wire harness and start testing wires...You Want the one that has no voltage when Key is off....And 12 volts when Key is on...

Once you find it get a wire splice Crimp and make your connection to it...Run a wire to your amps remote and you have it...

You can do the same thing in your fuse box just look for the accesory power and use a Fuse Tap (Get them at Radio Shack or auto parts store) Run the wire from fuse box back to the remote on amp and you are good to go...

Making the World A Louder Place

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.