door removel

Home / the12volt's Install Bay / Car Audio / door removel (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ksutton

Copper - Posts: 94

Joined: December 06, 2004

Location: United States

Posted: March 08, 2005 at 3:01 PM / IP Logged

does any one know how to remove a door on a 01 buick le sabre.

skoldspuppy

Silver - Posts: 342

Joined: July 11, 2004

Location: United States

Posted: March 08, 2005 at 3:10 PM / IP Logged

With or without explosive charges? door removel -- posted image. sorry I couldnt resist I was out shooting a 50 cal this weekend

No really pull off the interior panels just like any other door and disconnect the wiring from the entire door, open the door and you should have 2 hinges 1 at the top of the door and 1 at the bottom, they both should have 4 bolts attaching it to the frame of the car, Id use a floor jack under the door to take off the pressure of the weight of the door

Follow instructions in reverse order to install, if you unsure take it to a repair shop

Later

--Skold

2004 Honda Civic Ex 4Dr

Kenwood DDX-7015/W Nav

4 Fosgate T152C

Hifonics Brutus BX1500D

RE XXX 12 in a 4 Cube Snail Shell

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: March 08, 2005 at 3:43 PM / IP Logged

Open said door, throw car in reverse, hit the gas, wait till you hit something with the door, and said door will be removed. Note you did say DOOR!

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Alpine Guy

Platinum - Posts: 2,478

Joined: October 18, 2003

Location: Canada

Posted: March 08, 2005 at 5:36 PM / IP Logged

haha, , my co installer did that to a 99 CLK 430 benz....

2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.

forbidden

Platinum - Posts: 5,353

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: March 08, 2005 at 6:43 PM / IP Logged

I think that 50 cal would make short order out of pretty much any door. What on earth were you doing and where on earth would you have access to such high powered weaponry? Oh yeah, about the door..... Open it on a busy downtown street, some idiot on a cell phone will take care of the rest. We don't really get those vehicles here in truck country, if we did I would gladly post some pertinent info for you.

Top Secret, I can tell you but then my wife will kill me.

skoldspuppy

Silver - Posts: 342

Joined: July 11, 2004

Location: United States

Posted: March 08, 2005 at 7:27 PM / IP Logged

forbidden wrote:

I think that 50 cal would make short order out of pretty much any door. What on earth were you doing and where on earth would you have access to such high powered weaponry?

If you must know a friend of mine who used to be ex cop has a Import/export of firearms all you need is a Type 11 ATF licence "IMPORTER OF DESTRUCTIVE DEVICES, AMMUNITION FOR DESTRUCTIVE DEVICES OR ARMOR PIERCING AMMUNITION" it runs you about $3,000 every 3 years and well worth it

We were just testing a Barrett M107 out on some conceret walls and an old ford pinto out here in the everglades, if your ever in florida let me know we'll go shooting sometime.

Later

--Skold

2004 Honda Civic Ex 4Dr

Kenwood DDX-7015/W Nav

4 Fosgate T152C

Hifonics Brutus BX1500D

RE XXX 12 in a 4 Cube Snail Shell

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: March 08, 2005 at 10:08 PM / IP Logged

First, remove the door panel and disconnect the wiring. Try to pop the molex plugs loose and see if the harnesses can fit through. To remove the door, you should first undo the door stop. Open the door, and unbolt the little doodad. You'll probably have to remove the fender to get to the hinges.

My ex once told me I have a perfect face for radio.

oonikfraleyoo

Gold - Posts: 1,069

Joined: January 04, 2005

Location: United States

Posted: March 08, 2005 at 11:10 PM / IP Logged

My uncle works at the Barrett factory. I have one. In Alabama you need no special licence though I have a class 3 manufacturer's licence. If you drive down here, I'll take care of that door.

Nik

Jeeputer Progress

[|||||||||||-] 90%

Check it out.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door removel

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.