Alpine CVA-1004 Set up

Home / the12volt's Install Bay / Car Audio / Alpine CVA-1004 Set up (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bbay

Member - Posts: 1

Joined: August 26, 2006

Location: United States

Posted: September 28, 2006 at 11:58 AM / IP Logged

All:

I am moving my CVA-1004 head unit, NVE-N851A nav, CHA-S634 CD changer into my new(est) car. I bought a Pac 7 trigger for video bypass service. After installation, I am unable to access the 'set-up' screen. The disclaimer screen does not clear with pushing 'enter' on remote. I removed the Pac7 bypass and tried to connect the hand brake and foot brake leads on the heat unit and nav unit, but it is not clear in the manuals whether they are looking for 12VDC or ground. I have re-booted the head unit per manual, but no luck. Any advise out there? Much Thanks BB

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 28, 2006 at 9:59 PM / IP Logged

The parking brake wire yellow/Blue is looking for ground and the foot brake yellow/black is looking for +

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alpine CVA-1004 Set up

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.