the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

New head unit killed parking & dash lights...


Post ReplyPost New Topic
< Prev Topic Next Topic >
tdfb 
Member - Posts: 6
Member spacespace
Joined: January 22, 2003
Location: United States
Posted: January 22, 2003 at 11:11 PM / IP Logged  

I hope this is basic, and easy, and that I am ignorant. I was installing an old Pioneer head unit into a 99 plymouth breeze, after completing the install teh radio works great....

But the parking lights and teh dash lights don't work. At all. I even reconected the factory stereo and *nothing*. The dome light still works, the glove box light works, lights on the interior of the doors work...but no parking lights, and no dash lights.  Anyone have an idea what I did?  Thanks. tdfb@cox.net
Sound Pressure 
Silver - Posts: 711
Silver spacespace
Joined: March 09, 2002
Location: United States
Posted: January 22, 2003 at 11:34 PM / IP Logged  

Check your fuse. That's what it sounds like to me.

Sound Pressure
You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!
tdfb 
Member - Posts: 6
Member spacespace
Joined: January 22, 2003
Location: United States
Posted: January 22, 2003 at 11:40 PM / IP Logged  

Fuse is good. Checked that already. Same fuse runs dome light and other interior lights that are working.

Thx

Sound Pressure 
Silver - Posts: 711
Silver spacespace
Joined: March 09, 2002
Location: United States
Posted: January 22, 2003 at 11:54 PM / IP Logged  
Did you check all fuses including the ones in the engine bay?
Sound Pressure
You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!
tdfb 
Member - Posts: 6
Member spacespace
Joined: January 22, 2003
Location: United States
Posted: January 23, 2003 at 12:05 AM / IP Logged  

I didn't check all of them. Only the one that was listed in my diagram as controlling the dash/interior/parking lights. I'll check the rest of them tomorrow.

Also, just reading through the other posts, apparently others have had "similar" problems...

So the head unit is working fine right now...but no dash or parking lights. All loose ends were taped up.

Reinstalled the factory head unit and the parking lights and dash lights still didn't work. If I don't find any bad fuses does this point in the direction of the BCM or BCU whatever it was? Somehow that doesn't seem like a favorable (for me) diagnosis.

Sound Pressure 
Silver - Posts: 711
Silver spacespace
Joined: March 09, 2002
Location: United States
Posted: January 23, 2003 at 12:17 AM / IP Logged  
One other thing did you connect the dimmer wire? It should be a orange or ORANGE / white if so disconnect it. As far as your other question possibly. Check everything else before jumping to that. Hope not though. Let us know.
Sound Pressure
You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!
tdfb 
Member - Posts: 6
Member spacespace
Joined: January 22, 2003
Location: United States
Posted: January 23, 2003 at 7:27 AM / IP Logged  

The orange wire from the harness is not attached to anything. I noticed this morning that my wonderful "you left your lights on" chime doesn't work anymore either. One thought I had...could this be a result of a bad ground? I'm no expert by any stretch of the imagination, I just wasn't sure about the quality of my ground. But I figured since it worked it must have been alright.

I'm going to check all of the fuses and double check all of my connections tonight. I somehow doubt that the connections are fouled up since everything is working...plus I can't see a crossed wire being the gut of all of this. But then again, what do i know?  THanks for your help, I'll update you when I check all of the fuses like you suggested.

tdfb 
Member - Posts: 6
Member spacespace
Joined: January 22, 2003
Location: United States
Posted: January 23, 2003 at 8:58 AM / IP Logged  

OK. Let's give a more accurate picture of the situation. My 20A fuse for the Illum/Park lights was blown. No big deal. I put another one in, turned on the lights and still nothing. The fuse is blown again.

So at least its not a BCM...what is more likely the cause of the fuses popping?  Crossed wires or a bad ground?  I think I'm going to rerun the ground regardless, I wasn't happy with it. Could the bad ground be the source of this? Oh yah, btw....the stereo still works. What a trooper. 

Thanx again.

auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: January 23, 2003 at 4:33 PM / IP Logged  

Unplug your radio then replace the fuse.  If the fuse doesn't blow then you know there is something wrong with the radio's wiring.  If this is the case you probably grounded to an illumination or dimmer wire.  Make sure that all wires are either connected or at least capped or butt connected just to make sure that nothing at the radio is shorted out.

Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
tdfb 
Member - Posts: 6
Member spacespace
Joined: January 22, 2003
Location: United States
Posted: January 23, 2003 at 4:40 PM / IP Logged  

I reconnected all the wires and relocated the ground to a better location. Replaced the fuse, and *poof*. It works.  Thanks for your help, both Sound Pressure and auex. You got me in the right place.

Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer