the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

put a hole through my sub


Post ReplyPost New Topic
< Prev Topic Next Topic >
Ti240 
Member - Posts: 27
Member spacespace
Joined: January 29, 2005
Location: United States
Posted: May 16, 2007 at 1:49 PM / IP Logged  

last night, while mounting my eclipse titanium in a new box, the screw gun slipped and put a nice little gash in the surround. pretty weak huh put a hole through my sub -- posted image.. i would like to replace the entire surround instead of just patching it but eclipse isn't  being very helpfull with this and neither is the local dealer (they would prefer i buy a new sub). I am wondering if there is any way i can get my hands on just the surround - if this is even a recommended repair for a DIYer, or is there is a decent epoxy/adhesive that would do a good job of patching it. thanks in advance.

2005 Nissan Frontier - stock
comming soon...
Eclipse CD8443 deck
Eclipse PA5422 4-channel
Infinity Kappa Perfect 6.1 front
MBquart DKE116 rear
Eclipse SW9122 the 12's
Eclipse DA7232 bass amp
tcss 
Silver - Posts: 1,623
Silver spacespace
Joined: June 07, 2004
Location: United States
Posted: May 16, 2007 at 2:26 PM / IP Logged  
I've had some pretty good luck with marine sealant when my guys have "bass reflexed" a sub.
There is no such thing as free installation!
haemphyst 
Platinum - Posts: 5,054
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: May 16, 2007 at 2:55 PM / IP Logged  
If it's a "new generation" Ti, you can screw the magnet off the basket assembly, and simply replace it... Freight won't cost a mint, and you'll be back up and running in no time. Getting a replacemnt surround would be difficult, if not, impossible, and removing the old one completely won't happen... Generally, it's NOT a DIY repair...
IF you want to repair the rip, (which I recommend highly) any reasonable quality silicone caulk (the stuff that dries clear and smells like vinegar, NOT latex - the white stuff, the stuff that cleans up with water) you can usually place the ripped parts back in alignment, and smear a dab of that on the BACK of the rip, and it'll usually hold pretty well. BTW, you're gonna LOVE that combo - the Ti's on the 7232...
"Bass Reflexed." That's funny... put a hole through my sub -- posted image.
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: May 16, 2007 at 4:55 PM / IP Logged  

tcss wrote:
I've had some pretty good luck with marine sealant when my guys have "bass reflexed" a sub.

Hey, that would be like a ported surround.  Add some flames to that baby and you get at least 160 deebees.

Support the12volt.com
jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: May 16, 2007 at 5:47 PM / IP Logged  

I actually just repaired a slit on my Boston Acoustics G5 10".

I sewed it up and used the clear RTV silicone haemphyst recommended earlier, on the inside and outside (I don't care how it looksput a hole through my sub -- posted image.). I made sure the surround moved like it should after every step. -I'm sure it didn't need to be stitched, but with 3" of peak-to-peak excursion I wanted to make sure it holds together.

I let it dry for 24 hours like it says to, and it bumps like a champ!

Don't use too too much RTV, as to allow proper, uninterupted movement.

2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
Ti240 
Member - Posts: 27
Member spacespace
Joined: January 29, 2005
Location: United States
Posted: May 16, 2007 at 8:12 PM / IP Logged  

thanks for the replies. looks like silicone is the way to go. a buddy recommended cutting a small piece of window screen and attatching that to the interior with some more silicone. sounded like a good idea that would give some much needed reinforcing .

...or would that be too stiff?

2005 Nissan Frontier - stock
comming soon...
Eclipse CD8443 deck
Eclipse PA5422 4-channel
Infinity Kappa Perfect 6.1 front
MBquart DKE116 rear
Eclipse SW9122 the 12's
Eclipse DA7232 bass amp
jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: May 16, 2007 at 8:18 PM / IP Logged  

It'd probably just get in the way. The window screen would have to be held down with the silicone anyways, so it'd only be as strong as the silicone would allow, rendering it useless.

Just use some silicone on the inside and outside -to be sure. $.02

2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer