2007 kia sportage scytek 2000rs 2w

Home / the12volt's Install Bay / Car Security and Convenience / 2007 kia sportage scytek 2000rs 2w (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

brhaugen

Copper - Posts: 275

Joined: September 30, 2005

Location: North Dakota, United States

Posted: January 07, 2008 at 8:59 AM / IP Logged

The truck strarts, runs for 15seconds and then the RS is shutting it down.

It doesn't try to restart, it doesn't flash parking light - error codes.

I seams to only do this cold.

I am using Tach Monitor.

Any Ideas??

audioman2007

Copper - Posts: 580

Joined: February 20, 2007

Location: United States

Posted: January 07, 2008 at 10:27 AM / IP Logged

you have the tach wire from the RS connected to the tach wire on the vehicle?

brhaugen

Copper - Posts: 275

Joined: September 30, 2005

Location: North Dakota, United States

Posted: January 07, 2008 at 11:05 AM / IP Logged

Yes, and the tach rate programed.

I re-programed when vehicle was warmed up (lower tach rate).

audioman2007

Copper - Posts: 580

Joined: February 20, 2007

Location: United States

Posted: January 07, 2008 at 2:26 PM / IP Logged

im leaning towards the fact that something is causing the RS to shut off. Im leaning towards a sensor causing the system to think someone has broke in. I do know that when a RS is triggered, all sensors are supposed to be bypassed. But I know if you unlock your door using the key (with the alarm still armed) than the RS will shut off. Maybe one of your sensors isnt being bypassed. What sensors are installed?

brhaugen

Copper - Posts: 275

Joined: September 30, 2005

Location: North Dakota, United States

Posted: January 07, 2008 at 2:51 PM / IP Logged

The 2000rs-2w is a remote start only unit.

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: January 07, 2008 at 3:56 PM / IP Logged

What did you use to bypass the immobilizer?

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: January 07, 2008 at 5:38 PM / IP Logged

If you used a universal bypass(key in the box) your antenna ring may be slightly off from where it needs to be around the key cylinder. Try adjusting it when the bypass is cold.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Search for other posts by chriswallace187

brhaugen

Copper - Posts: 275

Joined: September 30, 2005

Location: North Dakota, United States

Posted: January 07, 2008 at 9:54 PM / IP Logged

It is not a security key truck

brhaugen

Copper - Posts: 275

Joined: September 30, 2005

Location: North Dakota, United States

Posted: January 07, 2008 at 9:56 PM / IP Logged

I forgot to mention that it starts normaly when warm.

brhaugen

Copper - Posts: 275

Joined: September 30, 2005

Location: North Dakota, United States

Posted: January 08, 2008 at 10:14 AM / IP Logged

Any other ideas guys.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.