the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

05 dodge magnum rke low battery


Post ReplyPost New Topic
< Prev Topic Next Topic >
asag20 
Member - Posts: 22
Member spacespace
Joined: October 16, 2002
Location: Canada
Posted: January 20, 2008 at 11:25 PM / IP Logged  
Hi fellow members, thanks for any help in advance, i install a combo system on this car and i used the bypasskits interface that did the locks & the bypass, the Mux cct. too had it's input from the bypass so i did not use any relaysor resistors,everything works fine when i remote start the car, but there is a reading on the cluster R K E Battery Low, and it keeps flashing then it will beeps a loud sound every 15 minutes, i then try with resistors & relays for the Mux cct. and i still have the same trouble, but something funny, when i insert the key & remote start the car there is no R K E Battery Low display. please any help will be much appreciated.
Jeff could you please help in this trouble.
ready to help others.
brhaugen 
Copper - Posts: 275
Copper spacespace
Joined: September 30, 2005
Location: North Dakota, United States
Posted: January 21, 2008 at 6:25 AM / IP Logged  
what model of remote start/alarm? what model of bypasskit?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 21, 2008 at 9:07 AM / IP Logged  
Replace the battery in your OEM key FOB.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
offroadzj 
Gold - Posts: 2,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: June 03, 2005
Location: New York, United States
Posted: January 21, 2008 at 8:22 PM / IP Logged  
Where did you ground the r/s? Its a long shot, but if the ground isnt solid enough it may be throwing off the draw from the ignition. Again, probably a long shot, but its worth a try.
Kenny
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
another-kelly 
Silver - Posts: 618
Silver spacespace
Joined: July 11, 2004
Location: United States
Posted: January 21, 2008 at 8:46 PM / IP Logged  
it checks for battery voltage in the OEM keyfob when the vehicle is starting/running. remote starting without the keyfob in the ignition gives the message. should disappear when you do key takeover
offroadzj 
Gold - Posts: 2,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: June 03, 2005
Location: New York, United States
Posted: January 21, 2008 at 8:50 PM / IP Logged  
as long as it goes away with key take-over, id say screw it.. lol
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer