the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

08 civic aftermarket locks


Post ReplyPost New Topic
< Prev Topic Next Topic >
desh187 
Copper - Posts: 310
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 13, 2002
Location: Canada
Posted: January 22, 2008 at 12:35 PM / IP Logged  
Has anyone installed aftermarket door lock actuators in 2008 Honda Civic? These have cables and was told that it is best to use oem ordered in actuators which are expensive.
Is there anything aftermarket made for this vehicle or any suggestions will be very much appreciated.
Thanks
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 22, 2008 at 5:02 PM / IP Logged  
A company over here called WOLF market kits for (UK) Ford Fiestas and Escorts which had cable operated locks. You might try them and modify them for your vehicle, I've done that with a Mazda people carrier. Basicly you cut away the outer, grip the inner then secure the outers so they don't move.
offroadzj 
Gold - Posts: 2,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: June 03, 2005
Location: New York, United States
Posted: January 22, 2008 at 8:54 PM / IP Logged  
i dont know if it will work on your car, but where the cable connects into the actual lock on the handle, there is usually a small piece of plastic. Depending on how much room you have, you may be able to drill a small hole in the plastic and bend the actuator rod at a right angle into the new hole. Just be sure that you dont drill too close to an edge because the actuators do have quite a bit of power and may break the plastic. I have also seen some people strip back the protective shielding to expose the actual cable, and attach right to the cable.
HTH
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
chadwa2003 
Copper - Posts: 353
Copper spacespace
Joined: January 08, 2005
Location: Canada
Posted: January 22, 2008 at 10:27 PM / IP Logged  
The install bay makes cable lock kits I don't know if you have any suppliers but a company called importel sells them.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, June 10, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer