the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

astroflex 3106 u


Post ReplyPost New Topic
< Prev Topic Next Topic >
rtb98 
Member - Posts: 3
Member spacespace
Joined: March 03, 2008
Posted: March 03, 2008 at 4:42 PM / IP Logged  

hi, i'm new overthere and after few search in you forum and on the net i cannot find any information about the astroflex 3106 U.

i try to find where to hock up my alarm LED.

basicly, i bought a car and the guys before me have done a pretty bad instalation, so i've got to do it again.

i fix every thing , except the damn LED.

i doesen'T have the particular wiring diagram for the 3106 U , but on from serie 500-1100-2100-4100.

so is somebody can help me out how to figure my LED !

ps: where i can find a nice one ? like a blue or something , is they are available at The source ? something easy to instal.

thank guys !

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: March 03, 2008 at 6:07 PM / IP Logged  

The older astro LEDs sucked. Very dim. I have tried to replace the LED with a DEI, and a Compustar blue. Still very dim.

The led plugs into the P-9 plug under the flapper. it's the smallest plug On the back of the unit it will show you.

Let me know!

rtb98 
Member - Posts: 3
Member spacespace
Joined: March 03, 2008
Posted: March 03, 2008 at 8:04 PM / IP Logged  

so basicly, you ground the LED somewhere and plug the power wire on P-9 ??

oh, on the 3106 U you get the conector P2 with 16 wires , P3 with 6 conectors , p4 with 7 conector , p5 with 3 and the accesorie plug in with P1- to P16

can you explain it a bit more please (i'm french so i mabey don'T understand every thing ;)

what that mean : The led plugs into the P-9 plug under the flapper. it's the smallest plug On the back of the unit it will show you.

thank you very mutch !

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: March 03, 2008 at 8:19 PM / IP Logged  

PM me your email address I can send you the install manual (if you don't have it) and it will be in French as well.

The P9 is a direct plug for the LED. Just plug it in.

rtb98 
Member - Posts: 3
Member spacespace
Joined: March 03, 2008
Posted: March 04, 2008 at 10:55 AM / IP Logged  
done !

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer