Bypassed Pats but pellet gets to cold

Home / the12volt's Install Bay / Car Security and Convenience / Bypassed Pats but pellet gets to cold (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mytgijoe

Member - Posts: 10

Joined: February 21, 2003

Location: United States

Posted: March 03, 2003 at 4:56 PM / IP Logged

I have a 99 mustang w/a viper 550 esp. I bypassed the PATTS system by removing the pellet from my key and connecting it to the sensor around the ignition. The only thing is that I've noticed on cold mornings the car won't start. Is this b/c of the pellet getting cold or what? After I drive the car or on a warm day the remote start works fine. I know there are better ways of bypassing this system(555F) but I only have one key and I'm not forking out $70 for another one. Please help.

Haku

Copper - Posts: 204

Joined: November 22, 2002

Location: United States

Posted: March 03, 2003 at 7:04 PM / IP Logged

Use a PKF module. I live in Montana, and even at -20 my Explorer still starts remotely every time. Here is a link for one, the cheapes I have found. These modules do not require use of a key. But you do need two programmed keys to program the module.

http://sitemanager.theinternetsolution.com/hometronicz/inc/pdetail?v=1&pid=140

Hak

Siemens Autostart

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: March 03, 2003 at 10:24 PM / IP Logged

Are you saying that you opened your only key and used it to bypass thr PATS permanently? What do you do when the thing freezes? Do you just sit there until the sun comes up?

J Rilla

Owner/Installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Bypassed Pats but pellet gets to cold

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.