is my alarm compatible with dei 530t?

Home / the12volt's Install Bay / Car Security and Convenience / is my alarm compatible with dei 530t? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

boydie

Member - Posts: 4

Joined: June 18, 2008

Posted: June 18, 2008 at 10:22 AM / IP Logged

Hello, what a fantastic forum!

I have a 1998 4Runner which is fitted with a Fujitsu Ten RS3000 VIP alarm and wondered if the DEI 530T is compatible with this system? I looked at the their website and they don't even seem to list this product anymore. Futheremore they don't give out info unless you are a dealer.

Has anyone added this module to a Toyota with this alarm?

Cheers

Gordon

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 18, 2008 at 11:46 AM / IP Logged

Yes, read the instructions for the 530t

boydie

Member - Posts: 4

Joined: June 18, 2008

Posted: June 18, 2008 at 11:59 AM / IP Logged

howie ll wrote:

Yes, read the instructions for the 530t

I haven't purchased it as yet because i wanted to be sure it would work! Are these instructions available for download and do they specifically mention the Toyota alarm?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 18, 2008 at 12:18 PM / IP Logged

You're looking for a circuit that goes neg and stays there whilst the alarm is on, you would be better off with a 529t since you won't be able to use its extra facilities.

boydie

Member - Posts: 4

Joined: June 18, 2008

Posted: June 18, 2008 at 1:05 PM / IP Logged

howie ll wrote:

You're looking for a circuit that goes neg and stays there whilst the alarm is on, you would be better off with a 529t since you won't be able to use its extra facilities.

Thanks for info, i'll look into the 529t.

Also, this is a long shot!

Does anyone have the wiring diagram for the RS3000? Does it exist? This question is asked so many times all over the internet, and nobody seems to have one. I emailed Fujitsu Ten a couple of weeks ago but they didn't reply.

boydie

Member - Posts: 4

Joined: June 18, 2008

Posted: June 19, 2008 at 9:58 AM / IP Logged

Bump!

Anyone have the wiring diagram for the RS3000

There is a special prize for the first one to post-up!!!!!!!!!!!!

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: June 19, 2008 at 12:09 PM / IP Logged

I would suggest you contact a Toyota dealership about this alarm, since it was almost certainly installed there. They may have wiring diagrams around.

Fujitsu Ten is both a Japanese OEM supplier and an aftermarket manufacturer(Eclipse and other brands)...but the aftermarket brands have distinctive brands/logos, etc.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Search for other posts by chriswallace187

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

is my alarm compatible with dei 530t?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.