the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

avital 4400 in 2007 ford expedition


Post ReplyPost New Topic
< Prev Topic Next Topic >
lafedog75 
Member - Posts: 2
Member spacespace
Joined: November 24, 2008
Location: North Carolina, United States
Posted: November 24, 2008 at 8:14 AM / IP Logged  
I had the avital remote start and alarm installed in my expedition back in march then I deployed. While I was deployed my wife drove the vehicle and the battery died twice. The business that installed the system went out of business. I returned and I tracked down the installer at another shop who looked at my system. I am drawing 500ma when everything is off, but since I have returned have not had any battery issues. Also it is getting colder here now, and the remote start won't work when the temp is down near freezing, but works when the weather warms up, any suggestions or tips would be much appreciated, thank you.
another-kelly 
Silver - Posts: 618
Silver spacespace
Joined: July 11, 2004
Location: United States
Posted: November 24, 2008 at 9:43 AM / IP Logged  
many different possibilities for the excessive current draw. check the draw then pull fuses on the alarm to see if it drops. as far as the not starting when cold, did you give them a key to put in a bypass under the dash? if so, then the problem is the ford keys rf based transponder in the key gets weaker when it gets cold out. either freeze the key (in the freezer) then position the key in the bypass and remote start. it may take a few attempts to find the "sweet spot" for the key while it's cold. other option would be to get a data based bypassed such as an XK04 or a PKALL, etc.
which branch are you in?
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: November 24, 2008 at 10:16 AM / IP Logged  

another-kelly wrote:
as far as the not starting when cold, did you give them a key to put in a bypass under the dash? if so, then the problem is the ford keys rf based transponder in the key gets weaker when it gets cold out. either freeze the key (in the freezer) then position the key in the bypass and remote start. it may take a few attempts to find the "sweet spot" for the key while it's cold. other option would be to get a data based bypassed such as an XK04 or a PKALL, etc.
which branch are you in?

To verify this is the problem beforehand, try the RS. Does the factory security light on top of the dash flash or go solid then out? If it starts flashing than the problem is the bypass for sure....

Mike M2
Tech Manager
CS Dealer Services
lafedog75 
Member - Posts: 2
Member spacespace
Joined: November 24, 2008
Location: North Carolina, United States
Posted: November 24, 2008 at 5:45 PM / IP Logged  
Marines, been in for 14 yrs now, thanks for the help. I am gonna try this tomorrow, wish me luck

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 11, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer