the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

03 dodge ram 2500 starting on its own


Post ReplyPost New Topic
< Prev Topic Next Topic >
robob69 
Member - Posts: 2
Member spacespace
Joined: January 08, 2009
Location: Texas, United States
Posted: January 08, 2009 at 2:33 AM / IP Logged  

I have a Matrix RSX 3.5 that I have the remote start was working well.

Now, When I press the remote start button twice the truck starts and runs for about 20 seconds and then shuts down, cranks back up and then shuts down again. this happens for three cycles.

Now just yesterday it starts up without me pushing anything. Starting up at 3 am and I have loud exhaust, I go running out with my .40 Cal buddy and find it running a cycle. On and off three times then nothing for about 4 hours then another cycle...

What could be the issue?

The shop that inatalled the device is now of course out of business,,

one more thing that bugs me about the 3.5.... My door locks do not lock when I crank the truck but when I turn off the ignition they pop up as if they were locked. The shop was not around long after the install so this was not an issue I could get looked at.

And one last thing: How can I increase the runtime on the turbo timer?

Thank you for your future help

Robert

Houston

i am an idiot 
Platinum - Posts: 13,674
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: January 08, 2009 at 3:02 AM / IP Logged  
Houston, We have a problem.
I am not familiar with that RS unit, but if you can find your manual, it sounds like it somehow got switched to timer mode. Some units also have temperature sensors, when they get to below freezing for a couple hours, they start up every few hours to avoid freeze-up. If you are in Houston this is not your issue, if working away from home in Anchorage, maybe so. Check on the timer mode thing. Maybe one of the others can help you out with instructions to get it out of that mode.
robob69 
Member - Posts: 2
Member spacespace
Joined: January 08, 2009
Location: Texas, United States
Posted: January 08, 2009 at 3:14 AM / IP Logged  

I have been able to find a manual for it yet.

I have thought about just replacing it since it is acting like this.

How do you put one in timer mode anyway?


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, June 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer