viper 5701 honda civic 05

Please be more specific.

pink ignition one output/input- this wire connects to the wire from the main ignition harness that reads 12volts when the key is in the on position and also has 12 during cranking the starter and 12 after the car has started, ( most likey the colour is BLACK / YELLOW, it's a thick gauge wire)

RED / white to constant 12 volts (most likely it's white, thick gauge)

orange to the wire that reads 12 when the key is in the acc position( can't remember off hand)

the wire that reads 12 volts only during cranking is your starter wire cut it in half (most likely the colour is BLACK/ white) the green wire goes to the side from the keyswitch, and the purple to the other side

red- constant 12 volts

RED / black to conatant 12 volts

the rest of the wires you won't need for this car, twist back the ends and insulate with tape,

test all your wires to verify,