aux options for 09 f150 remote start?

I have a new 2009 F150 Platinum.  Just put in the factory Ford/Code Systems alarm with remote start, the 6-button fob version.  I would like to hook up the defrost and heated seats to my system, but people say I can't because of the module network on these trucks?

thanks...

thanks the replies.

Yes it is the Powercode system, I'm familiar how it works (how to turn on the defrost).  Yes, the AUX wires are on the C-harness.  C-11 is AUX2/defrost, a blue/white wire like you said.  C-10 is the AUX1  and it says C-2 is the AUX3 

Now I see I misread the DEI wiring info, it does say these wires are on the HVAC plug, not at the SJB.  Defrost is WHITE/ orange  with a - latched polarity.   Left heated seat is a WHITE/ blue wire with - polarity. and right heated seat is gray / YELLOW with - polarity.

So I couldn't grab those heated seat wires and hook them up to the other AUX wires on the C-harness?

ok, maybe  won't mess with them then, don't want to fry anything.

but you think I could hook up the defrost wire with no problems?

just stinks that I have these extra 1 and 2 buttons on my fob and can't really use them on anything.  Somebody else told me that a Ford databus interface is in the works (aftermarket) that will help with tie in the heated seats, etc., but it probably won't work with the Ford rmst.

well, I think I'm not going to mess with any of those options, don't want to fry anything.

But I came up with a new idea for an option.  My truck does have the power folding mirrors. Could I hook up the C-10 AUX 1 wire from my Powercode alarm to the mirrors?  I don't want the mirrors to fold every time I arm or disarm the alarm, rather I just want to hit the 1 aux button on my fob to fold in the mirrors in or out when I want to.

I got the mirror wiring diagram from the Ford service manual.  It identifies the fold wire coming from the switch, and also identfies the fold out and fold in wires at the relay module (driver seat module/DSM). 

Do you think I could get this to work and how many relays would it take?   Anyone else have experience with the Ford power folding mirrors?

Thanks Joe.   So both mirrors would fold with button 1 on the remote?  Also, would my factory mirror switch still work/still fold the mirrors too?

also, do I need to convert the the AUX 1 headlight output to the power sliding door output in the programming option bank 5?