the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

rs 04 express van dei xk06


Post ReplyPost New Topic
< Prev Topic Next Topic >
easterntg 
Member - Posts: 2
Member spacespace
Joined: September 07, 2009
Location: Virginia, United States
Posted: September 07, 2009 at 9:39 PM / IP Logged  
I have wired up an alarm with remote start capability. My ignition passlock II wire colors are yellow, tan, and orange with white stripe. The dei instructions are a little vague, can someone tell me which wires I need to connect and where to. The alarm works fine but, I want to get the remote start wired correctly before I test it. Let me know what additional info is needed to respond if any. Thank you.
easterntg 
Member - Posts: 2
Member spacespace
Joined: September 07, 2009
Location: Virginia, United States
Posted: September 07, 2009 at 10:38 PM / IP Logged  
btw, this is a commercial van with no power windows or locks. I just need to figure out how to do the bypass. Does this vehichle use databus??
snisen02 
Member - Posts: 5
Member spacespace
Joined: September 01, 2009
Location: Iowa, United States
Posted: September 09, 2009 at 2:47 PM / IP Logged  

xk06 will need to be flashed for the plxr firmware - you will use:

brown - status output

red - +12v

black - ground reference in column ( i believe this should be ORANGE / black)

blue - resistance output (yellow in column)

orange - + starter input

pink - + ignition input


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, July 5, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer