programing remote ca 425

Home / the12volt's Install Bay / Car Security and Convenience / programing remote ca 425 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

outlaw66

Member - Posts: 2

Joined: October 12, 2009

Posted: December 12, 2009 at 4:15 PM / IP Logged

I am having trouble programing a new remote (never got one when purchesed vehicle) I can reboot system by removing fuses, jump valet terminal (no buton) but the system will not go into a program mode! any help would be great

ca 425 with dei 555L

2000 yukon xl

Thanks!!!

i am an idiot

Platinum - Posts: 13,714

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: December 12, 2009 at 7:39 PM / IP Logged

https://www.the12volt.com/installbay/downloads.asp?srch=all&term=425

Top of page 8 on the first manual listed.

outlaw66

Member - Posts: 2

Joined: October 12, 2009

Posted: December 12, 2009 at 9:00 PM / IP Logged

thanks, but i have the manual downloaded already. heres a little more info. If I "reset" the system by removing fuses, it will flash lights untill I press the valet button. when I try to press valet to enter the program mode, I get no results. Question, at the door open wire should there be 12 volts? i've read on here that it should be grounded?? I have a remote from autoalarmpro.com and it's the one they say is compatable with my system. Basicly having trouble getting into program mode!! Please Help

2000 GMC yukon xl

ca 425 with dei interface

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

programing remote ca 425

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.