no hole in h3 door for new wires?

Home / the12volt's Install Bay / Car Security and Convenience / no hole in h3 door for new wires? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ozofoe

Member - Posts: 15

Joined: November 21, 2009

Location: Illinois, United States

Posted: January 11, 2010 at 11:19 AM / IP Logged

2006 H3 Hummer: I'm trying to install a 530t window module in the driver's kick panel, and run wires into door.

The lock and window wires break via a wire harness in the door jam. This does not leave me a rubber grommet to make a larger hole, or a new hole to run the five new wires per window (RF, LF). I could drill a new hole in the door frame, but there might be an easier way.

This forum is knowledgeable and experienced so someone might have seen this on other GM vehicles.

chev104275

Gold - Posts: 1,436

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: January 11, 2010 at 4:03 PM / IP Logged

is there i hard connector in the jamb ? if there is you can go through an open cavity in the connector

If i Can't Install it I Don't need it Joe

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 12, 2010 at 10:53 AM / IP Logged

Lookie this!

ozofoe

Member - Posts: 15

Joined: November 21, 2009

Location: Illinois, United States

Posted: January 12, 2010 at 4:26 PM / IP Logged

Thanks guys. The pics in the link made it very clear what you're both saying.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

no hole in h3 door for new wires?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.