keyless entry, 94 mazda b4000

Home / the12volt's Install Bay / Car Security and Convenience / keyless entry, 94 mazda b4000 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

larryf

Member - Posts: 7

Joined: April 07, 2010

Location: Texas, United States

Posted: April 20, 2010 at 7:37 AM / IP Logged

need to hook up wires for keyless entry on mazda b4000 1994. what color and where is wire to horn and parking lights?

go rangers

kreg357

Platinum - Posts: 7,826

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: April 20, 2010 at 8:18 AM / IP Logged

According to Bulldog Security...

Parking Light is Brown (+) at headlight switch or fuse box.

The horn is found in the steering column as follows: YELLOW/LIGHT GREEN(-) is found on vehicles WITH FACTORY CRUISE CONTROL

and BLUE(+) is found on vehicles WITHOUT FACTORY CRUISE CONTROL.

Check with DMM because the Ford Ranger is the same vehicle and the Blue wire listed for it is (-).

Soldering is fun!

larryf

Member - Posts: 7

Joined: April 07, 2010

Location: Texas, United States

Posted: April 21, 2010 at 8:41 AM / IP Logged

i am installing an astra 50 keyless entry system in a 1994 mazda 4000 pickup .in the instructions it says that i need to add a relay if my parking lights are above 10a, they are 15a. also on the hornthe output is (-)500ma and i need a relay to hook this to the horn. i need wiring diagrams for this. i am new at this and would appreciate any help you could supply .thanks in advance.

go rangers

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: April 21, 2010 at 7:50 PM / IP Logged

if the wire is negative, you dont need a relay. if its positive polarity, you need a relay to convert polarity from neg to pos.

your parking lights draw 15amps when they are on? are you testing properly or did you just use the parklight fuse to determine it was 15 amps?

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

larryf

Member - Posts: 7

Joined: April 07, 2010

Location: Texas, United States

Posted: April 21, 2010 at 10:21 PM / IP Logged

thanks. i will try this tomorrow.

go rangers

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

keyless entry, 94 mazda b4000

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.