park light output to turn signals

Home / the12volt's Install Bay / Car Security and Convenience / park light output to turn signals (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hiluxrunner

Member - Posts: 5

Joined: October 04, 2002

Location: United States

Posted: April 13, 2003 at 9:12 PM / IP Logged

Is it possible to use existing parking light output from alarm w/ built in relay and connect it to the wire that signals the hazards so my turn signals will flash instead of my park and brake lights ?? Thanks

Chris

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: April 13, 2003 at 9:14 PM / IP Logged

yes it is. check the hazard wire with a volt meter before you hook any wires up.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

hiluxrunner

Member - Posts: 5

Joined: October 04, 2002

Location: United States

Posted: April 13, 2003 at 9:22 PM / IP Logged

thanks for the quick response ill check it out tomarrow

thanks

Chris

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

park light output to turn signals

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.