the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 ford taurus factory alarm disarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
tooler 
Member - Posts: 20
Member spacespace
Joined: February 04, 2004
Posted: October 19, 2010 at 5:35 AM / IP Logged  
I am having trouble finding the wire to disarm the factory alarm. Info I have says it is GREEN/ violet. Does this wire go to ground when key is turned in lock? If anyone can assist me in finding wire it would be appreciated.
Ween 
Platinum - Posts: 1,368
Platinum spacespace
Joined: August 01, 2004
Location: Illinois, United States
Posted: October 19, 2010 at 7:28 AM / IP Logged  
hi,
what style key does the taurus have...metal blade or fob... meaning a regular ignition key cylinder? the metal key doesn't have a disarm signal in the door cylinder switch. you need to pulse the ignition and the transponder bypass at the same time to disarm the alarm.
mark
tooler 
Member - Posts: 20
Member spacespace
Joined: February 04, 2004
Posted: October 19, 2010 at 8:06 AM / IP Logged  
It has the metal key regular ignition
chrisnepa 
Member - Posts: 14
Member spacespace
Joined: October 07, 2010
Location: Pennsylvania, United States
Posted: October 19, 2010 at 9:03 AM / IP Logged  
What are you trying to accomplish? Are you installing a remote starter? If so, then the above answer is right.
Been installing for 15 years
tooler 
Member - Posts: 20
Member spacespace
Joined: February 04, 2004
Posted: October 19, 2010 at 9:13 AM / IP Logged  
Yes remote start.
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: October 20, 2010 at 11:18 AM / IP Logged  
Have you tested to make sure your car has a factory alarm?
tooler 
Member - Posts: 20
Member spacespace
Joined: February 04, 2004
Posted: October 20, 2010 at 11:20 AM / IP Logged  
Yes it does
jim hunter 
Silver - Posts: 351
Silver spacespace
Joined: March 23, 2006
Location: United States
Posted: October 20, 2010 at 10:18 PM / IP Logged  
only way to disarm the ford alarm is either with factory remote or with ign and transponder at same time. if doing start only no extra steps are needed but if your doing keyless and or alarm also, youll have to wire in a relay to pulse the ign wire and the transponder bypass at the time of unlock to disarm alarm, or just make certain you never lock doors with dr door open therefore alarm wouldnt arm, it only arms with factory fob or if locking doors while dr door is open

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer