ground when running output for 2 function

Hi, Im planning on installing a Skytek Galaxy 2000rs-m in a 2006 toyota corolla and have 2 questions. The first is real simple. i cant find a wire chart for it, but think its the same as an 05. Secondly and most important is the ground when running output. I believe I need this wire to run both the bypass kit and the clutch switch bypass. I was wondering if I needed to use diodes or if the relays will keep the signals seperate. This will be my first manual install and want it to go smoothly. Thanks in advance.

Toyota Corolla 2003 thru 2008 are the same.  Here is a link to Bulldog Security for info :  http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.aspSoldering is fun!

thanks, what do you think about splitting the grw output? I may need it for the keysense too....

Definitly need to diode isloate with keysense.  You don't want the clutch to bypass and the transponder bypass module coming on when you put the key in the ignition for a regular start up.   Keysense is usually only needed if the car has the Factory Alarm.Soldering is fun!