the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 audi s4 remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
stang351w 
Silver - Posts: 350
Silver spacespace
Joined: August 20, 2003
Location: Canada
Posted: February 01, 2011 at 10:00 PM / IP Logged  
Hello, i've been givin the wonderful task of finishing a remote starter that was partially installed into a 2010 audi S4 with a manual trans.  The shop installed the remote starter but said there was no bypass for the clutch. the bypass that was used is a Idatalink one (not sure excatly which one but i do have a ADS-AL-CA which will work for the car) im just wondering if someone has done a remote start on this style car and able to help me out with bypassing the clutch. thanks
Tri County KustomZ
certified installer
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: February 02, 2011 at 10:18 AM / IP Logged  
have you tested at the clutch to see how it works?
shoot howie II a pm, he might be able to help you out.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
stang351w 
Silver - Posts: 350
Silver spacespace
Joined: August 20, 2003
Location: Canada
Posted: February 02, 2011 at 10:38 AM / IP Logged  
at this time i haven't looked uner the dash. I contacted my tech line and asked them about it and they had told me that there was no clutch wire and that it was to be controlled by the bypass module and they had no other information on it. So i called ADS and they told me the ADS-AL-CA would work. but ith two different storys and no information i figured befor i start digging into this sweet car...i'm going to do some homework  lol
Tri County KustomZ
certified installer
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: February 03, 2011 at 6:37 AM / IP Logged  
Get out your DMM and start looking for the clutch switch, even if it's data a relay would still by-pass the switch.
stang351w 
Silver - Posts: 350
Silver spacespace
Joined: August 20, 2003
Location: Canada
Posted: February 03, 2011 at 1:50 PM / IP Logged  
alright..thanks for the info.  would it also matter if it has the key port for the ignition rather then the normal key?
Tri County KustomZ
certified installer
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: February 04, 2011 at 6:16 AM / IP Logged  
RUN!!!
stang351w 
Silver - Posts: 350
Silver spacespace
Joined: August 20, 2003
Location: Canada
Posted: February 04, 2011 at 8:19 PM / IP Logged  
hrmm...not sure if that's good to hear or not  lol. 
Tri County KustomZ
certified installer

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer