asianwolf pw4 window module

This should have been an easy install but i am having trouble getting the trigger on my alarm to activate the window (autopage rf 320). If i manually put a wire on the alarm the window will roll up but, once I use one of the aux channels, nothing happens. Does anyone have any tips on what to do or how to troubleshoot this problem.Bigab3

Maybe not enough current to trigger it, use a relay like this:- Aux* to 85. 12v+ constant fused at 3 amps to 86. GOOD ground to 87. Window close trigger to 30. Use a 1N4004 diode between 85 and 86 with its band towards 86 * Used a timed aux rather than an armed out to 85, set for a max of 10-15 seconds. If you use the GWA wire you will have a flat battery in six to eight hours because the relay is constantly energised.