viper alarm /remote start

Home / the12volt's Install Bay / Car Security and Convenience / viper alarm /remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mbalenhle

Member - Posts: 6

Joined: September 22, 2007

Location: Alberta, Canada

Posted: October 17, 2011 at 8:26 PM / IP Logged

HI.

I need help please, i have car alarm python 323 model (viper 3202) , and a car remote start python model 1401(viper 5101) all connected to a chevy cruze, 2011 model , my problem is i can not get them to work together ,i have a problem with bypassing the python alarm system when its armed,when i remote start the car the alarm goes off, i have tried connecting the status output wire from the remote start to the H1/7 blue wire main harness 12 pin connector of the alarm system as they suggest in order to bypass some alarm zones but no luck, the alarm sysem is connected thru a D-ball all bypass system which strangely have taken over the vehicle antitheft system i can arm and disarm the factory system with python remote .

Any suggestions will do thanks.

mba222

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: October 17, 2011 at 9:03 PM / IP Logged

Mine thought would be take them out and put in a Python 872, (Viper 5701).

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: October 18, 2011 at 2:59 PM / IP Logged

What is triggering the alarm? Is it the ignition input, the door pin, the trunk pin, or the shock sensor (or another sensor installed)?

I would guess it's the ignition signal - if it is you may need to diode isolate that signal from the remote start output so that the alarm never sees the ignition voltage provided by the remote start.

Kevin Pierson

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper alarm /remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.