2001 continental

Home / the12volt's Install Bay / Car Security and Convenience / 2001 continental (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: December 16, 2011 at 6:25 PM / IP Logged

The rx and tx wires in the lincoln continental don't match what fortin says and the module (key override all) won't program.the wires in the car at the pats module are:

1-brn/wht

2-vio/blue

3-RED / blk

4-tan/orange

fortin says - rx-brn/yell tx-gray/red

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: December 16, 2011 at 6:54 PM / IP Logged

3 rx 4 tx

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: December 16, 2011 at 8:24 PM / IP Logged

thanks!got it starting but now service engine soon light is on and check traction control is on the message center.

chev104275

Gold - Posts: 1,428

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: December 16, 2011 at 9:04 PM / IP Logged

You missed an ingition or acc wire

Ignition 1 BROWN / PINK (+) IGNITION SWITCH HARNESS

Ignition 2 GRAY / YELLOW (+) IGN SWITCH HARNESS

Accessory 1 BLACK/ LIGHT GREEN (+)

If I remember right there are 2 gray / YELLOW wires

If i Can't Install it I Don't need it Joe

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: December 17, 2011 at 3:53 AM / IP Logged

I was thinking the same thing,I might have the 2nd ignition wire jumper on accy. I will have to get the car back to check it out.

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: December 22, 2011 at 1:11 AM / IP Logged

costumer said that the traction control light was already on,the obd11 codes are P0500 and U1039,these codes suggest that the ignition switch chime switch is defective,anyone experiance this before?

chev104275

Gold - Posts: 1,428

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: December 22, 2011 at 8:42 AM / IP Logged

Did the little metal tab break when you took the shroud off or when you put the bypass ring in

If i Can't Install it I Don't need it Joe

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: December 22, 2011 at 11:13 AM / IP Logged

i didn't pull the ignition switch out,I used a key override all without a transponder ring.I didn't notice any little metal tab breaking.I am getting the car back friday afternoon and plan on replacing the chime switch and hope that takes care of the service engine soon light.

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: December 23, 2011 at 8:51 AM / IP Logged

has anyone actually found the grn/vio dis-arm wire in the dr kick of this car?found one grn/vio in the dr door boot but it didn't dis arm the alarm.

chev104275

Gold - Posts: 1,428

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: December 23, 2011 at 12:43 PM / IP Logged

There should be a GREEN/ violet disarm wire at the lcm on the right hand side of the steering column

If i Can't Install it I Don't need it Joe

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.