2009 nissan sentra w/ intelli key locks

Installing an Autopage alarm in a 2009 Nissan Sentra with intelli-key. I have installed alarm/remote combos in 5 vehicles to date, but this one is a doozy... I cannot get the doorlocks to work. I believe I have found the right wires and tested them with a meter. I think my problem comes down to the disarm wire. I found a light blue wire in the kick panel coming from the door that I tested while turning the key. The bulldog website says "blue to white". Not sure what that means. I hit the unlock button on the remote and I hear the relays click in the brain, but no dice. It states that the vehicle needs a double-pulse and I programmed it for that. Anyone done an install on this car that can tell me what they did that worked?

use a data bypass and that will solve all your issues/make your install easier. you have the wrong lock and unlock wires. Lock RED / silver dots (-)@ dkp harness coming in from door Unlock PINK/Silver dots (-) @ dkp harness coming in from door Disarm BLUE TO WHITE (-). This simple means its a blue wire in the door, but after entering the vehicle through the connector, the wire changes to white in colour. Driver Kick Or BCM, White 40 Pin Plug, Pin 7 Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

The help with the disarm wire is great, thank you. I am using a DLPK...my bro picked out the alarm, I have to do w2w to make it work. I am using those doorlock wires already....I think the disarm white wire is the key!

yes you need the disarm wire to unlock the car. single pulse to disarm, double pulse to unlock all doors.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert