5704, 2002 tacoma

Home / the12volt's Install Bay / Car Security and Convenience / 5704, 2002 tacoma (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

tra8989

Member - Posts: 9

Joined: July 08, 2012

Location: Washington, United States

Posted: July 08, 2012 at 10:33 PM / IP Logged

I'm installing the 5704 in my 2002 toyota tacoma. I'm also installing door lock actuators 524t. Manual everything. Here are the questions

I do not intend to use the remote start, do i need the harness?

My door locks are not pulsing negative anything? Any ideas? Yes im using relays. Yes im talking about the 3 pin 2 wire one blue one green.

Does the hood need to be shut to go into menu mode?

Thanks

Thomas

itsyuk

Silver - Posts: 505

Joined: February 23, 2010

Location: United States

Posted: July 08, 2012 at 10:49 PM / IP Logged

without the remote start harness, you wont have an ignition sense for the alarm and i believe the starter kill is built into that harness.

yuk

quiet rural missouri, near KC.

If your system moves you physically and not emotionally, you have wasted your money.

tra8989

Member - Posts: 9

Joined: July 08, 2012

Location: Washington, United States

Posted: July 08, 2012 at 11:04 PM / IP Logged

What ones out of the ten would i connect?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 09, 2012 at 3:23 AM / IP Logged

Door open not hood OR green door trigger wire grounded to enter the menu.

Pink to ignition 1.

Cut starter lead.

Green to key side and violet (purple) to starter side.

Does the 514L come as a kit with it's own relay?

If not the default wiring is NEG (-) lock and unlock, green and blue, going to relays wired as "add actuators" see the relay section on this site.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 09, 2012 at 3:24 AM / IP Logged

Also,you can't enter menus (program mode) unless that pink is connected.

tra8989

Member - Posts: 9

Joined: July 08, 2012

Location: Washington, United States

Posted: July 09, 2012 at 3:53 PM / IP Logged

They didnt come with relays, i just bought your standard five pins and when i tested them nothing happened.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 09, 2012 at 5:10 PM / IP Logged

Like this,fused at 15amps for 2 motors, 30 for 4 motors.

You will need those diodes:- add_actuators.bmp

tra8989

Member - Posts: 9

Joined: July 08, 2012

Location: Washington, United States

Posted: July 09, 2012 at 7:16 PM / IP Logged

What would happen if they werent installed (the diodes)?

Where would i pick them up at?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 10, 2012 at 2:34 AM / IP Logged

Good chance that you will fry the 5704.

tra8989

Member - Posts: 9

Joined: July 08, 2012

Location: Washington, United States

Posted: July 10, 2012 at 6:22 PM / IP Logged

Would it fry the whole thing or just the lock portion, because i tested the locks without the diodes and nothing happend. Now if its fried it there any opther wires i can use to unlock and lock?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.