viper 5704 2000 nissan maxima

I want to install a remote start in 2000 nissan maxima using viper 5704. just wondering if somebody could tell me if the wiring is the correct way. car wiring diagram. http://alarmsellout.com/support/diagrams/vehicle/NISSAN%20MAXIMA%201987-2005.pdf Viper wiring manual. http://pdf.ampire.de/viper/N5704_2011-09b_web.pdf Here is the wiring. Maxima - 12v constant Green Viper - H1/1 Red (+) 12DC constant input Viper - H3/2 RED / White (87) Flex Relay +12V input (30A Fused) Viper - H3/6 Red Ignition 1 (+) 12V input (30A fused) Viper - H3/9 RED / Black Accessory/Starter relay (30A fused) Maxima - 12V Ignition Wire BLACK/ Red (Smaller Wire) Viper - H3/1 Pink (+) Ignition wire Input/Output Maxima - Starter Wire BLACK/ Red or BLACK/ White Viper - H3/4 Violet (+) Starter Output to Car Side. Viper - H3/5 Green (+) Starter Input to Key Side. Maxima - Second Starter wire BLACK/ Blue Viper - H3/7 Pink/White (30) FLEX RELAY OUTPUT Program to work. Maxima - Accessory Wire RED / yellow Viper - H3/3 Orange Maxima- Second Accessory Wire WHITE/ Blue Viper - H2/22 Orange (-)200ma Accessory output. Use Relay 85 - H3/3 Orange Accessory Output wire. 86 - H2/22 Orange (-) 200 ma Accessory output wire. 87 - Accessory Wire 30 - 12V constant 87a not used. Nissan - Parking lights (+) RED / Blue Viper H1/5 White. Nissan - Factory alarm Arm (-) ORANGE / Black Viper H2/24 GREEN / WHITE Nissan - Factory alarm Disarm (-) ORANGE / Blue Viper - H2/4 GREEN/ Black Nissan - Tachometer WHITE/ Green Viper - H2/23 Tach input Violet/White Nissan - Brake wire (+) RED / Green Viper - H2/16 Brown.

Change the pin 85 of your relay to the H2/22 (-) trigger. Pin 86 and 30 to a constant 12 volt source and 87 out to 2nd accessory. https://www.the12volt.com/relays/page1.asp#n2pWhen all else fails, Read the Instructions

Support the12volt.com Make a Donation

One more question For the factory arm/disarm can i hook straight to the (-) wires or do i need relays.

Shouldn't need a relay for the Factory Alarm DisarmWhen all else fails, Read the Instructions

Support the12volt.com Make a Donation

Thank you for all your help. Just trying to do as much research as possible before attempting install.

Take your time, One wire at a time. Plan on the weekend at least. Use a DMM.When all else fails, Read the Instructions

Support the12volt.com Make a Donation

I got the alarm and remote start working with out any problems I did it over the weekend like you said. it Took me almost a day and half used a DMM to. Thanks for your help.