avital 4103, 2007 ford e-250

im trying to install in a 2007 ford e-250,havn,t been able to find a detailed wiring diagram Help, its going to get cold real soon.

12volts      lt. GREEN/ purple (x2) (common 60A)      +      ignition harness Starter      WHITE/ pink      +      ignition harness Second Starter      N/A            Ignition      pink/lt. green      +      ignition harness Second Ignition      N/A            Third Ignition      N/A            Accessory      gray / YELLOW      +      ignition harness Second Accessory      BLACK/ lt. green      +      ignition harness Keysense      BLACK/ pink      -      ignition harness Power Lock      red to ORANGE / black      5wi      either kick, door harness Notes: Use the passenger door lock switch when metering the wires, as it is the master switch. On vehicles with remote keyless entry, use pink / YELLOW (-) for lock and pink/lt. green (-) for unlock in either kick or at the VSM in the passenger kick. Power Unlock      brown to yellow/red      5wi      either kick, door harness Notes: Use the passenger door lock switch when metering the wires, as it is the master switch. On vehicles with remote keyless entry, use pink / YELLOW (-) for lock and pink/lt. green (-) for unlock in either kick or at the VSM in the passenger kick. Lock Motor      pink/black      5wi      VSM in passenger kick Unlock Motor      RED / orange      5wi      VSM in passenger kick Parking Lights+      brown      +      headlight switch Parking Lights-      N/A            Hazards      same as turn signal wires            Turn Signal(L)      lt grn/wht (F), lt grn/org (R)      +      turn signal switch Turn Signal(R)      wht/lt blu (F), org/lt blu (R)      +      turn signal switch Reverse Light      BLACK/ pink      +      driver kick, harness to rear Door Trigger      RED / pink      -      driver kick Dome Supervision      BLACK/ lt. blue      +      relay to right of steering column Trunk/Hatch Pin      same as right front door trigger            Hood Pin      N/A            Trunk/Hatch Release      N/A            Power Sliding Door      N/A            Factory Alarm Arm      N/A            Factory Alarm Disarm      N/A            Disarm No Unlock      N/A            Tachometer      WHITE/ pink      ac      PCM, top plug, pin 25 (gas) or pin 1 (diesel) Notes: The PCM is under the hood, next to the brake master cylinder. Wait to start      see Tech Doc 1091            Brake Wire      dk. green      +      brake pedal switch Parking Brake      lt. GREEN/ red      -      parking brake switch Horn Trigger      dk. blue      -      horn switchJeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Readyremote.com and bulldogsecurity.com both have the wiringIf i Can't Install it    I Don't need it   Joe

Thanks, seems like i got the main heavy wires connected correctly,obviously the ground is connected and the aentenna is plugged in . I cant get the programing light to do anything. Basicaly i can take it from there once i have the barebones wiring done to make this thing start. Does the nuetral safety switch connection need to be done for this model to work?

Neutral safety goes to ground if it's an automatic. If you can't get into programming try pressing the unlock on the remote before getting into programmingIf i Can't Install it    I Don't need it   Joe

Is the neutral safety needed for the 4103 to work? I believe i have everything else correct but i cant get the program light to come on

Neutral safety needs to be connected if you want theremote start to work.If i Can't Install it    I Don't need it   Joe

Thanks , i will try that asap,i have installed other brands in the past and this one seems to be more complicated than the previous installs. Does, anyone know the only connections needed to get this thing going? Im not worried about doorlocks yet ,thanks

12volts      lt. GREEN/ purple (x2) (common 60A)      +      ignition harness Starter      WHITE/ pink      +      ignition harness         Ignition      pink/lt. green      +      ignition harness         Accessory      gray / YELLOW      +      ignition harness Second Accessory      BLACK/ lt. green      +      ignition harness Keysense      BLACK/ pink      -      ignition harness Parking Lights+      brown      +      headlight switch   Tachometer      WHITE/ pink      ac      PCM, top plug, pin 25 (gas) or pin 1 (diesel) Notes: The PCM is under the hood, next to the brake master cylinder. Wait to start      see Tech Doc 1091 --ONLY NEEDED IF DIESEL Brake Wire      dk. green      +      brake pedal switch Horn Trigger      dk. blue      -      horn switch Note: horn is optional but provides audible feedback when programming. Also need to bypass transponder. Hope this helps.Lectric Guy

Bypass transponder ?