3 issues with Viper 4105V+GMDLBP-'03 Silverado

Home / the12volt's Install Bay / Car Security and Convenience / 3 issues with Viper 4105V+GMDLBP-'03 Silverado

Welcome Guest :)

Members

< Prev Topic Next Topic >

gttj

Member - Posts: 1

Joined: February 28, 2016

Location: North Carolina, United States

Posted: February 28, 2016 at 5:36 PM / IP Logged

I installed a Viper 4105V with the GMDLBP in my '03 Chevy Silverado. After troubleshooting a couple issues, I've still got a couple that I can't figure out.

1) Most of the time I can't lock the vehicle with the lock button on the remote. If I hold the lock button down the panic goes off so I know the button and receiver are working. If I double tap the unlock button on the remote, the vehicle with lock. Every once and awhile it will work but I can't track the steps that gets it to work and repeat them.

2) If I've locked the truck from the button on the door or with the key from the outside and then try to use the unlock button on the remote, the doors will unlock but then lock back ~3 seconds later.

3) The remote start function works but if I push the brake pedal without the key installed, the vehicle doesn't shutdown. I've got the brown wire connected to the white wire at the brake pedal.

Thanks in advance for your thoughts on troubleshooting....

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: February 29, 2016 at 3:05 PM / IP Logged

Is the GMDLBP set to type 4? and locked in.

Are the connections soldered?

Violet wire should have been the last wire connected.

Are all the connectors in tight? No bent pins?

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.