the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Lock Motor wire REV


Post ReplyPost New Topic
< Prev Topic Next Topic >
prince504 
Copper - Posts: 108
Copper spacespace
Joined: December 25, 2015
Location: United States
Posted: July 26, 2016 at 2:21 PM / IP Logged Link to Post Post Reply Quote prince504
I was looking up the Lock & Unlock MTR wires for a 2010 Ford F150 and it states their polarity is REV...
Please can someone explain what this means?
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: July 26, 2016 at 3:19 PM / IP Logged Link to Post Post Reply Quote lurch228
Means reversing (only applies if you don't have factory keyless already!)
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: July 26, 2016 at 3:27 PM / IP Logged Link to Post Post Reply Quote lurch228
With Factory keyless only need to use.
Power Unlock    VIOLET/GRAY     (-)     SJB C2280C PIN 4...
PowerLock     GRAY / YELLOW     (-)     SJB C2280C PIN 17  
prince504 
Copper - Posts: 108
Copper spacespace
Joined: December 25, 2015
Location: United States
Posted: July 26, 2016 at 7:05 PM / IP Logged Link to Post Post Reply Quote prince504
lurch228 wrote:
Means reversing (only applies if you don't have factory keyless already!)
Thnx for the response. Is it possible to obtain a negative pulse from the Lock/Unlock Motor wires? Thinking of using them for a Arm/Disarm (-) Input
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: July 27, 2016 at 10:02 PM / IP Logged Link to Post Post Reply Quote lurch228
Yes just need to make sure that the power door lock switch is isolated from the arm/disarm input . Otherwise you could shut the alarm off with the power door lock switch. Unless that is what you are trying to do. But beware that anyone can break window and hit unlock and disarm the system.
prince504 
Copper - Posts: 108
Copper spacespace
Joined: December 25, 2015
Location: United States
Posted: July 27, 2016 at 11:30 PM / IP Logged Link to Post Post Reply Quote prince504
lurch228 wrote:
Yes just need to make sure that the power door lock switch is isolated from the arm/disarm input . Otherwise you could shut the alarm off with the power door lock switch. Unless that is what you are trying to do. But beware that anyone can break window and hit unlock and disarm the system.
It is my understanding that the Lock/Unlock Motor wires (not the regular Power Unlock/Lock wires), aren't linked to the door switch... Is that incorrect?
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: July 28, 2016 at 1:20 AM / IP Logged Link to Post Post Reply Quote lurch228
yes and no as the motors are reversing meaning the polarity is switched from + and - to - and positive to reverse lock motor direction.
As I see it you will need to use a relay to isolate the disarm input from the power door lock switch. You will need to check and see if interrupting the (Power Unlock    VIOLET/GRAY     (-)     SJB C2280C PIN 4...) will stop the power door lock switch from unlocking but still allow the factory keyless to unlock. If it does then you would wire the relay in as follows door lock wire side to 85 and 87a, - alarm disarm input to 87, junction side of unlock wire to 30, +12v constant to 86. When the power door lock switch is pushed it disconnects the disarm input wire and unlocks. The rest of the time the disarm wire is connected.
This will require you to test and verify the proper function is as I think it is. If not then you will have to seek help from some one who has done this on a Ford like yours.
prince504 
Copper - Posts: 108
Copper spacespace
Joined: December 25, 2015
Location: United States
Posted: July 28, 2016 at 8:31 AM / IP Logged Link to Post Post Reply Quote prince504
lurch228 wrote:
yes and no as the motors are reversing meaning the polarity is switched from + and - to - and positive to reverse lock motor direction.
As I see it you will need to use a relay to isolate the disarm input from the power door lock switch. You will need to check and see if interrupting the (Power Unlock    VIOLET/GRAY     (-)     SJB C2280C PIN 4...) will stop the power door lock switch from unlocking but still allow the factory keyless to unlock. If it does then you would wire the relay in as follows door lock wire side to 85 and 87a, - alarm disarm input to 87, junction side of unlock wire to 30, +12v constant to 86. When the power door lock switch is pushed it disconnects the disarm input wire and unlocks. The rest of the time the disarm wire is connected.
This will require you to test and verify the proper function is as I think it is. If not then you will have to seek help from some one who has done this on a Ford like yours.
Thnx for the info. I noticed you said "The rest of the time the disarm wire is connected" but you have at disarm wire input at pin 87. Did you mean to put in at 87a?
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: July 28, 2016 at 11:43 AM / IP Logged Link to Post Post Reply Quote lurch228
Oops, sorry was tired your wright swapped them should be 85 and 87 together and disarm input to 87a.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer