avital 4103xl door unlock

Home / the12volt's Install Bay / Car Security and Convenience / avital 4103xl door unlock

Welcome Guest :)

Members

< Prev Topic Next Topic >

jetfixerdw

Member - Posts: 7

Joined: October 23, 2016

Location: New York, United States

Posted: October 26, 2016 at 7:59 PM / IP Logged

Hi all I have a question. I installed an avital 4103xl in my 2010 sonata. Everything works except when the car is remote started I cannot open the car doors. The lock and unlock works with the avital remote when the car is not running but if I remote start it, the key fob will not open the doors. It seems like a Hyundai thing that blocks the remote from working with the car running. Is there anyway to pulse the door trigger or disable the factory system so the door lock will work with the engine running? Thanks for any insight

chev104275

Gold - Posts: 1,433

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: October 26, 2016 at 8:21 PM / IP Logged

How do you have the door locks wired ?

If i Can't Install it I Don't need it Joe

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: October 26, 2016 at 9:54 PM / IP Logged

You need to pulse the Lock Detection wire with unlock.

jetfixerdw

Member - Posts: 7

Joined: October 23, 2016

Location: New York, United States

Posted: October 27, 2016 at 9:05 AM / IP Logged

mark thanks for the reply. I looked at the wiring for my car in this forum and it doesn't how a lock detection wire. The only thing that shows is an alarm disarm wire in two places. Will this work to disarm the alarm momentarily to get the locks to work?

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: October 27, 2016 at 9:54 PM / IP Logged

Orange is your disarm. brown is lock detection (shows ground in the unlocked position) diode isolate and pulse with unlock. Do disarm also. You may need to select double pulse unlock also, but it'll work, I do it all the time.

jetfixerdw

Member - Posts: 7

Joined: October 23, 2016

Location: New York, United States

Posted: October 29, 2016 at 10:14 AM / IP Logged

thanks mark I will give It a shot. Thank you for the feedback.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.