2015 Jeep Renegade Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 2015 Jeep Renegade Remote Start

Welcome Guest :)

Members

< Prev Topic Next Topic >

beerbill

Member - Posts: 6

Joined: April 19, 2018

Location: New York, United States

Posted: April 28, 2018 at 5:26 PM / IP Logged

Using asd alca on 2015 jeep renegade with manual transmission. Anyone know which clutch wire to connect to ask alca? Thanks

kreg357

Platinum - Posts: 7,826

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: April 29, 2018 at 4:31 PM / IP Logged

Think I would give iDatalink a call. Their WEB site only lists the Renegade with Automatic Transmission

and that is why the install guide does not show a clutch connection. I'm trying to remember if that MT

vehicle is not possible to do because of the inability to get Reservation Mode ( and Idle Mode ) to work.

Soldering is fun!

beerbill

Member - Posts: 6

Joined: April 19, 2018

Location: New York, United States

Posted: April 29, 2018 at 4:54 PM / IP Logged

Thanks. I'm really pulling my hair out on this one. Have tried different firmware configurations and still no good.

kreg357

Platinum - Posts: 7,826

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: April 29, 2018 at 5:12 PM / IP Logged

Fortin doesn't list it yet. Not sure how different it is from a Fiat 500X.

Howie II can tell you some Fiat stories.... 2015 Jeep Renegade Remote Start -- posted image.

Here is the Clutch info :

Clutch Pedal BROWN/BLACK (+) @ CLUTCH PEDAL SWITCH 6 PIN CONN, PIN 4

Soldering is fun!

beerbill

Member - Posts: 6

Joined: April 19, 2018

Location: New York, United States

Posted: April 30, 2018 at 12:48 PM / IP Logged

Thanks a lot for wiring detail. Yes this vehicle uses the same platform as the Fiat 500x. Built in the same place. This will be the last one we will do until they catch up with the firmware. When you open the door the car shuts off -no take over available. Thanks for all the help.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.