Non Responsive Avital 4105L - Think I fried it

Home / the12volt's Install Bay / Car Security and Convenience / Non Responsive Avital 4105L - Think I fried it

Welcome Guest :)

Members

< Prev Topic Next Topic >

vr4boostin

Member - Posts: 2

Joined: April 25, 2018

Posted: April 30, 2018 at 12:35 AM / IP Logged

We installed an Avital 4105L today and it was working correctly until a ground wire made contact with the center pin (normally unused, pin2) of Door Lock, White 3-pin connector. I know this because we were searching for a door trigger wire and think I killed it.

The unit will not respond to any remote control or any other inputs. I have tried removing power for several minutes and still have nothing.

Is the unit dead?

vr4boostin

Member - Posts: 2

Joined: April 25, 2018

Posted: April 30, 2018 at 12:36 AM / IP Logged

The install is in a 2006 P71.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.