the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2007 Chevrolet Aveo Disarm/Lock/Unlock Wire


Post ReplyPost New Topic
< Prev Topic Next Topic >
sand33p_sidhu 
Member - Posts: 25
Member spacespace
Joined: January 19, 2017
Location: Manitoba, Canada
Posted: August 20, 2019 at 12:00 AM / IP Logged Link to Post Post Reply Quote sand33p_sidhu
Greetings,
I have installed a remote start using CM900 Compustar module and I have been having hard time finding lock, unlock & disarm wire. According to bulldog security wiring diagram, lock & unlock wires are supposed to be in driver's kick harness but had no luck, disarm wire is supposed to be in driver's door harness, its not there.
According to some of the other wiring diagrams, lock & unlock wire is supposed to be on the pass. kick panel and I don't see anything.
Anyone got any idea? I just want to disarm the alarm when the car starts, I would be okay without the lock & unlock. Any other idea of disarming the alarm when remote start starts the car?
Any help is appreciated!
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: August 20, 2019 at 10:23 AM / IP Logged Link to Post Post Reply Quote i am an idiot
Power Lock      lt. blue      -      driver kick, white 20 pin plug, pin 8           
Power Unlock      white      -      driver kick, white 20 pin plug, pin 9           
Lock Motor      gray      5 wire      driver kick, white 20 pin plug, pin 1           
Driver Unlock Motor      brown      5 wire      driver kick, white 20 pin plug, pin 2           
Passenger Unlock Motor      no progressive unlock                     
Factory Alarm Arm      factory remote only                     
Factory Alarm Disarm      lt. grn/red or brn/blk to pur (dr door key unlock)      -      driver kick, white 20 pin plug, pin 12      
sand33p_sidhu 
Member - Posts: 25
Member spacespace
Joined: January 19, 2017
Location: Manitoba, Canada
Posted: August 20, 2019 at 12:09 PM / IP Logged Link to Post Post Reply Quote sand33p_sidhu
Thank You for the information.
Do you know if i would need to use any relays to make lock & unlock work? According to bulldog security, it says it is a Type B lock & unlock.
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: August 20, 2019 at 4:15 PM / IP Logged Link to Post Post Reply Quote i am an idiot
No relays needed. Connect your alarm's lock wire to the Lt. Blue mentioned above, and connect alarm's unlock wire to the white mentioned above.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer