Add Non DEI Sensors to DEI Module 5X06

Home / the12volt's Install Bay / Car Security and Convenience / Add Non DEI Sensors to DEI Module 5X06

Welcome Guest :)

Members

< Prev Topic Next Topic >

mr98z71

Member - Posts: 9

Joined: February 24, 2016

Location: Manitoba, Canada

Posted: January 05, 2020 at 4:09 PM / IP Logged

Hi, I recently purchased a viper 5706V, I am in the process of installing it, I purchased a 507M tilt sensor from dei, Wired it seperate from the 504D shock sensor harness the module came with, hooked it up to trunk pin instant trigger. Could I have hooked up the output of the 507 to one of the MUX connectors coming from the brain (currently going to the 504). I Also purchased a Omega au94tm and will be wiring it shortly, with the Omega, is it MUX compatible and can I wire it to the unused green wire coming from the shock sensor harness.

jvwilson101

Member - Posts: 6

Joined: March 14, 2018

Location: California, United States

Posted: January 06, 2020 at 12:58 AM / IP Logged

Short answer- yes and yes.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.