window rollup module problem

Hey guys,

I just purchased 2 TRC 90-950 window roll-up modules. One is used to roll up on alarm arming, and the other is used to roll down after disarming.  I have a Vadar alarm (exactly the same as the Clifford Arrow 3, except with 2 way FM remote transceiver). The rollup trigger is from the alarm ground when armed wire, and the rolldown trigger is from the channel A output from the alarm. The rollup when armed works fine, but the rolldown feature does not. When I try to roll down, the driver's window always rolls down (by the way, I have a 2003 Chevy S-10 Xtreme), but the passenger's window works sometimes, doesn't work at all other times, and sometimes it goes down half way. I have noticed that when I roll the windows up and down using the switches, the driver's side always finishes first. What can I do to remedy this situation?

Also, about a week and a half after I installed the Vadar alarm, my dome light switch stopped turning on the interior light (the light still goes on in other situations) and my fog light switch doesn't turn on my fog lights. The alarm works fine, and I'm wondering if this is just a coincidence or if the switches aren't working as a result of my alarm install.

Thanks in advance,

sjankus