APS-995C, APS996 installer Programming

Home / the12volt's Install Bay / Car Security and Convenience / APS-995C, APS996 installer Programming (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cherring69

Member - Posts: 10

Joined: June 11, 2003

Posted: June 18, 2003 at 4:31 PM / IP Logged

Anyone know the trick to get into installer programming on these systems? I've tried the ignition on, valet 3 times, ignition off, then ignition on again, but I'm not getting (or don't appear to be) into installer programming, only the channel programming (for the buttons on the remote).

I fixed the earlier problem I was having by relocating the antenna- but still can't get in to change the programming options. HELP!

TIA

QnD

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: June 19, 2003 at 5:45 PM / IP Logged

You could always double check that your thick blue wire is connected to true ignition; that could never hurt.

Not sure if you noticed this, but the procedure to program and alarm features is different from the remote start ones.......and the remote start ones are much easier to set, so try doing them first.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

APS-995C, APS996 installer Programming

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.