alarm problem 95 mazda

Home / the12volt's Install Bay / Car Security and Convenience / alarm problem 95 mazda (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

amf17

Member - Posts: 3

Joined: July 06, 2003

Location: Canada

Posted: July 06, 2003 at 12:43 PM / IP Logged

i just installed an alarm in my 95 mazda b2300. Ungo MS3001. It all seemed to be working fine but something is wrong with the driver side door switch. All the connections are good. After the alarm has been set for about an hour, it suddenly just goes off. I jumpered the "ignore delayed dome light" because in the diagram it shows that it is connected to the door trigger. I waited about an hour and the alarm didn't go off........ i thought it was fixed. But then i opened the driver side door and the alarm didn't go off at all.

Any help would be greatly appreciated

Thanks

Andrew

amf17

Member - Posts: 3

Joined: July 06, 2003

Location: Canada

Posted: July 06, 2003 at 1:09 PM / IP Logged

I was reading aomething on this site after i posted this topic. Would i have to put diodes on the wires connecting the switches to the wire on my alarm????

Andrew

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: July 06, 2003 at 7:30 PM / IP Logged

http://www.velocitymotorsport.com/images/install_notes/149.jpg

Use the above diagram 1 for a relay isolation of the door triggers to stop falsing of the system.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm problem 95 mazda

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.