95 mitsubishi eclipse gst factory alarm

Home / the12volt's Install Bay / Car Security and Convenience / 95 mitsubishi eclipse gst factory alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dookie30

Member - Posts: 2

Joined: August 02, 2003

Location: United States

Posted: August 02, 2003 at 12:40 PM / IP Logged

I had a python 880xp alarm installed and sometimes when I disarm it and open the drivers door the factory alarm goes off. The installer hooked the new alarm disarm to the door locks. Is there a way to fix this or disconnect the factory alarm? Thanks.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 02, 2003 at 2:15 PM / IP Logged

OEM Alarm Disarm GREEN / WHITE (-) DRIVER KICK PANEL.

you can t-off the unlock wire and t-tap into the above wire. that should disarm the factory alarm

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

dookie30

Member - Posts: 2

Joined: August 02, 2003

Location: United States

Posted: August 02, 2003 at 2:54 PM / IP Logged

Thanks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

95 mitsubishi eclipse gst factory alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.