Starter Cut Relay ? in a 2002 Jeep Wrangler

Thanks for any help you can give. I am installing an Alpine SEC-150R alarm in a 2002 Jeep Wrangler. The question I have is with the wiring of the Starter Cut Relay. It has 2 wires that connect to the Main Unit  (Yellow-Ignition, ORANGE / Black-Starter Cut Output) and 4 wires that connect to the Starter/Ignition, where I have the questions.

 Where do the following wires connect on a 2002 Jeep Wrangler?

Yellow – Ignition [I am assuming this connects to the Jeep’s Blue ignition wire.]

Red- To Key(30)             [?]

RED / White – Normally Open Connection (87)      [?]

RED / Yellow – Normally Closed Connection (87A)   [?]

 Thanks! J

Hey SOtC,

Yeah leave the RED / WHITE disconnected and the YELLOW is ignition.  The RED on pin 30 goes to the yellow starter wire at the key side and the RED / YELLOW (87a) goes to the other end of the yellow starter wire that was cut towards the engine.

Thanks Big Dog!

I think it's all coming togther now!

SOtC