Clifford RSIII

Home / the12volt's Install Bay / Car Security and Convenience / Clifford RSIII (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

vaderfop

Copper - Posts: 95

Joined: April 18, 2003

Location: United States

Posted: October 20, 2003 at 6:49 PM / IP Logged

I have a Clifford RSIII installed on my 98 Oldsmobile Intrigue, it has been there for about 8 months now. About a week ago it started having transmitter problems (I think). I was no longer getting the signal back from the alarm telling the transmitter if had armed/disarmed/started/etc. Then two days ago the transmitter either stoped transmitting or the alarm stoped recieving the signals. I have tried to reprogram the transmitter to the alarm brain with out success. I also tried resetting the alarm brain by unpluging its main harness for about two hours then plugging it back in, this also did not work.

Does anyone have any ideas on what else i could do.

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: October 20, 2003 at 7:04 PM / IP Logged

Get a new remote. They fail all the time. This time get one of the newer versions - part # 479C. They are more reliable.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford RSIII

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.