My shock sensor won't work!

Home / the12volt's Install Bay / Car Security and Convenience / My shock sensor won't work! (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

day952

Member - Posts: 16

Joined: July 30, 2002

Location: United States

Posted: August 02, 2002 at 3:05 PM / IP Logged

I have a viper 500 Hf installed in my ride, my shock sensor stopped working. I have tried a replacment sensor but still no luck, this is the type that just plugs into the "brain" unit. The strange thing is when the contacts inside the connector are jumped together I get an instant trigger My shock sensor won't work! -- posted image.

My shock sensor won't work! -- posted image.

Is there someway to clip the plug on the sensor and wire it to other leads coming from the "brain"???? I'm also looking for some help on adding a DEI channel expander to my system, I have a four door accord with all four door handels shaved but ran out of channels to use for the rear doors and trunk etc. Thanks for anybodys help...day952@aol.com

day952

DeathsJester12V

Silver - Posts: 352

Joined: July 22, 2002

Location: United States

Posted: August 02, 2002 at 11:24 PM / IP Logged

Yeah, there is a way............wanna know............Ok I'll tell you

go to your local store and get some diodes!! The diodes will help the alarm isolate the triggers as well as prevent false alarms....just but teh cathode ( or band) towards the pin switches ( which is what I'm assuming you are using for the hhod and trunk) and tap them into the door trigger wire. Make sure the band is towards the pinswitch!!

Now onto the shock sensor......your best bet would be to have the brain checked....it might be fubared inside where the shock sensor plugs in at...another possibility is ( I just recently started working with DEI's so I'm not too familiar with them) is you might have accidentally shut off the shock sensor with the remote....consult your manual and it willstate whether ot not your alarm has that ability...if it does..go the the proceudre and see if you can turn it back on...if not, go to your local DEI dealer and have them look at it....that's all I can offer right now....I'll ask in the shop tomorrow, maybe one of the other installers I work with has an idea...

Đễẳ†ђş 12\/ Ĵęśŧē®™

Search for other posts by DeathsJester12V

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

My shock sensor won't work!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.