2nd ignition

Home / the12volt's Install Bay / Car Security and Convenience / 2nd ignition (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bmfwalton

Member - Posts: 3

Joined: August 01, 2002

Posted: August 02, 2002 at 6:55 PM / IP Logged

I have installed a remote start in a car that had a 2nd ignition. So I just took the 2nd ignition wire and connected it to the one on the car and it worked. Now I am putting in the same alarm in a different car,(sidewinder 6500) and as I was reading through the directions it said for the 2nd ignition you need a relay. So do you really need one or not? My other car worked fine.

joyride2k

Member - Posts: 40

Joined: August 02, 2002

Location: United States

Posted: August 02, 2002 at 7:39 PM / IP Logged

On DEI units I believe only the 3rd ignition requires a relay. 1st and 2nd ignition do not require relays.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2nd ignition

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.