DEI Repair Program

Home / the12volt's Install Bay / Car Security and Convenience / DEI Repair Program (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

AlanJE

Member - Posts: 28

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 05, 2003

Location: United States

Posted: January 15, 2004 at 9:44 PM / IP Logged

Does anyone know of a repair program offered by DEI. I believe that the output to pop the trunk is fried because I am not getting any reading w/ a DMM. information like address phone number?

Thanks

Alan

bassop823

Copper - Posts: 64

Joined: December 15, 2003

Location: United States

Posted: January 15, 2004 at 9:50 PM / IP Logged

If you had the unit installed you can take it back to the installer and have them send it off for repair for you. If you done the install yourself lots of luck. The best thing to do is to take it to a local shop and ask them to send it in for them. I have a 551t that I got sent off 2 weeks ago and have yet to get it back. I also had a C-60 sent off, but it came back in a week and the shop only charged me 10 dollars, which is what dei charged them.

bassop

jrilla

Gold - Posts: 1,498

Joined: November 19, 2002

Location: North Dakota, United States

Posted: January 15, 2004 at 10:26 PM / IP Logged

WHy do you think its fried? Did you see or smell smoke? What happened to make you think this. You may be able to repair it yourself if it is just an issue of a small burning of the solder on the pc board.

J Rilla

Owner/Installer

sroth140

Silver - Posts: 513

Joined: August 27, 2003

Location: United States

Posted: January 16, 2004 at 12:54 AM / IP Logged

wire up a relay and see if it clicks the coil on and off. take the (-) RED / white to 85 and 12v to 86.

you do know that the button has to be pushed for a few seconds (3 to 5) before it triggers right? some people we do installs for dont understand why the trunk doesnt open when they press it like a lock/unlock button. its got to be held down until the relay triggers.

AlanJE

Member - Posts: 28

Joined: December 05, 2003

Location: United States

Posted: January 17, 2004 at 7:32 PM / IP Logged

yes I have hooked up a realy and it does not click.....I do know that the button needs to be held for a few seconds...... but I stil get nothing......No clue???

Thanks Alan

bmf1000d

Silver - Posts: 345

Joined: September 30, 2003

Location: United States

Posted: January 17, 2004 at 7:44 PM / IP Logged

The best bet would be to contact DEI and ask for the repair dept there number is 1-800-876-0800

"Big" Mike

Double Take

Fremont, Ne

remember to check all your wires with a dmm not a test light!!

i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

DEI Repair Program

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.